In this tutorial i will show you ,step by step to make a wireless connection .....
1.first before make new connection ,make sure that your wireless have turn on .
For laptop that will using as a server ....
2.go to windows icon wireless ,in the right bottom corner ,then klik Open
network and Sharing Center
(or you can go to Control Panel =>Network and Internet =>Network and Sharing
Center ) .
3.then in change your networking setting choose set up a new connection or network
then choose set up a wireless ad hoc (computer to computer) network ...
4.after that klik next ....
5.then in the network name fill that the name of network wireless ..
In security type i suggest you to choose WPA2-Personal (safe network than No
outhentication).then fill your password in security key and check list the save
this network ,then klik next ....
6.after that
Wait a minutes ,than after create new connection success ,go to tray wireless
(icon wireless) .if you see the connection that you have made ,is mean that you
have success .and now you can connect the second laptop connected
After you success make a new connection now let try to this .
Setting ip address server and host ....
1.keep the wireless running don’t turn off it.then connected host to the wireless
connection that have been created ..klik connect ..
2.after connected ,right klik in the wireless connection .klik status then klik
property
3.Unchecklist Internet Protocol versi 6 (TCP/Ipv6)
4. then klik in IP versi 4 (but don’t uncheck) => properties
5.In general tab choose : use the following IP address
And in the IP address : 111.111.111.1 (ex. setting ip in server).
In other laptop you can fill ex 111.111.111.2 .
When you klik in empty field on subnet Mask ,computer will otomatically generate
it and then klik ok .(don’t forget to do this with all laptop which will do
share file ,it mean that server and the other must setting IP address ) .
NB :disable your antivirus
